Komatsu 6 way blade modifications
D20_dvr
Join Date: Sep 2005 Posts: 2 Perry, GA |
2005-10-04 117372
I'm looking for someone that has modified the blade control valve system on a Komatsu 6 way blade. I've built a 3 point hitch for the back of mine and would like to add an other center block and the linkage kit for the joystick (4 way control) By adding a second center block and reversing the linkage from inside to outside of the push-pull block I can have the left-right function control the front blade push angle. Then the push-pull control would raise and lower the 3 point hitch. I checked with the dealer here in middle GA and the only way to buy the block I need is to buy whole 3 valve assembly ($4300.00) a price of 1/3 of the dozer.
If anyone knows where I can get the manufactures name and part number for the center valve block for the 6 way blade it would make this upgrade much easier.
Thanks
Brian
Reply to | Quote Reply | Add Photo
Komatsu 6 way blade modifications
D20
Join Date: Posts: 1 |
2006-04-23 128152
We feel your pain & decided to use 2 3way manual valves in the tilt circuit below the floor.
Will hand turn the 2 valves 90 degrees to select front option or rear.
Valves, hoses, connects & labor abt $350.
A Lee, Fl ....
Reply to | Quote Reply | Add Photo
Go Top
Share This